1 Scope
1.1 This standard applies to 60 – 250°C single- or multiple-conductor jacketed or unjacketed, integral or nonintegral cables and single or multiple coaxial cables for telephone and other communication circuits such as voice, data, and audio for on-premise customer systems. These cables are may contain one or more optical fibre members. For the purpose of this standard, a coaxial cable or coaxial member conductor is a single conductor with a shield. For the purpose of this standard, a single- or multiple-conductor unjacketed cable is a cross-connect wire.
1.2 This standard applies to communications cables that are intended primarily for installation in accordance with Section 60 of the Canadian Electrical Code Part I, and Article 800 of the National Electrical Code (NEC), ANSI/NFPA 70. They are rated for 300 V applications, but are not so marked.
Note: See Annex a for a complete list of wire types covered by this Standard and the specific electrical codes for which they are intended.
1.3 This standard does not apply to communications cords.
1.4 In Canada, the Type "-CI" circuit integrity markings are not recognized by the Canadian Electrical Code, Part I.
In the US, Type CMH is not recognized in the NEC.
1.5 If a value for measurement is followed by a value in other units in parenthesis, the second value may be only approximate. The first stated value is the requirement.
優爾檢測電線電纜全球燃燒測試中心
優爾檢測(廣東)有限公司－優爾檢測華南檢測中心，地址：惠州市博羅縣石灣鎮滘源路滘嚇馮屋草州A棟和C棟，實驗室和辦公用地：4500平米，總投資3000多萬，擁有儀器設備５００余套，在物理，化學，可靠性，環保(RoHS, Reach,CP65等)，燃燒等方面擁有豐富的檢測經驗和技術實力．依據全球各國標準對電線電纜及橡塑化工材料在阻燃、耐火、低煙、無鹵、環保、可靠性、電氣特性方面的要求而建立。在全球各大認證機構(UL、VDE、CCC、IMQ、 TUV-RHEINLAND、TUV-SUD、CSA、BASEC、KEMA、PSE、KC、TLC、ETC、GRL、ANATEL、EAC)和廣大客戶的認可和支持下，我們希望能成為全球頂級的燃燒測試基地，服務于來自全球的終端客戶、電商平臺、布線廠商、線纜及材料企業！
優爾檢測電線電纜全球燃燒測試中心，僅燃燒測試實驗室用地就達到１１００多平方，投資約１５００多萬，
電線電纜燃燒測試中心檢測范圍：
(１）網線/光纜／功率線／火災報警線/天線：美國UL/加拿大CSA標準： CM/CMR/CMP/FT4/FT6級大型燃燒;
(２）歐洲建筑法規強制指令CPR EN50399標準成束熱釋放量燃燒,B,C,D,E等級全項測試;
(３）國標GB18380線纜成束燃燒 A, B, C,D級成束燃燒;
(４）英國耐火線纜BS6387和BS8491，GB/T 19666（N,NＪ,NS）；
(５）美國VW-1/IEC60332-1-2/EN60332-1-2單根垂直燃燒;
(６）橡塑材料UL94/國標GB/T 8815阻燃測試；
( 7）氧指數、鹵酸氣體、灼熱絲、漏電起痕、PH值等測試
產品體系認證：
UL、CCC、CSA、CE、ETL、TUV、VDE、PSE、KTL、GS、FDA、FCC、e-Mark、SASO、GOST、DOT、國軍標等全球認證服務 ；
ISO9001、ISO14000、SA8000、TS16949、OHSA18000等國際質量體系認證；
安規環保檢測: 安全、環保、環境、燃燒、EMC、RF、RoHS、REACH等項目檢測；
安規技能培訓: 產品安全測試、實驗室操作人員培訓、安規工程師培訓、專業技能培訓等
詳詢Sunny 139-1314-2465
檢測認證人脈交流通訊錄
