檢測認證人脈交流通訊錄
這真不是您需要的服務?
| Test item 測試名稱: | |
| Furniture - Strength and stability of furniture - Part 7: Domestic and contract storage furniture-Performance requirements | |
| 家具-家具的強度和穩定性-儲存家具耐力和強度的測定 | |
| Test info 測試內容: | |
| Clause | Test Requirement |
| 6.2.2 | Static load test for tops and bottoms頂面和底面的靜態載荷測試 |
| 6.2.1 | Sustained load test for tops and bottoms頂面和底面的長期載荷測試 |
| 6.1.4 | Strength of shelf supports 架子的支撐的強度 |
| 6.1.3 | Deflection of shelves 架子的變形量 |
| 6.3.1 | Strength of clothes rail suports掛衣桿的支撐的強度 |
| 6.3.2 | Dislodgment of clothes rails 掛衣桿均勻負重測試 |
| 7.1.2.1 | Vertical load on pivoted doors軸心門的垂直載荷 |
| 7.1.2.2 | Horizontal load on pivoted doors軸心門的水平載荷 |
| 7.2.3 | Durability of sliding doors and horizontal roll fronts滑動門和水平卷簾門的耐久性測試 |
| 7.1.3 | Slam shut test of pivoted doors軸心門的撞擊測試 |
| 7.1.4 | Durability of pivoted doors軸心門的耐久性測試 |
| 7.2.2 | Slam shut/open of sliding doors and horizontal roll fronts滑動門和水平卷簾門的撞擊測試 |
| 7.3.1 | Strength of bottom-hinged flaps底面裝鉸鏈的吊板的強度 |
| 7.3.2 | Durability of flaps吊板的耐久性測試 |
| 7.3.3 | Drop test for top-hinged flaps頂面裝鉸鏈的吊板的跌落測試 |
| 7.4.2 | Durability of vertical roll fronts垂直卷簾門的耐久性測試 |
| 7.4.1 | Slam shut/open of vertical roll fronts垂直卷簾門的撞擊測試 |
| 7.5.2 | Strength of extension elements 伸出部件強度 |
| 7.5.3 | Durability of extension elements 伸出部件的耐久性 |
| 7.5.4 | Slam open/shut test of extension elements 伸出部件的急開急閉測試 |
| 7.5.5 | Displacement of extension element bottoms 伸出部件底部測試 |
| 7.5.6 | Interlock test 互鎖 |
| 7.6.2 | Strength test for locking and latching mechanisms for extension elements |
| 伸出部件鎖強度測試 | |
| 7.6.3 | Strength test for locking and latching mechanisms for doors, flaps and roll fronts 門、翼板鎖強度測試 |
| 6.4.1 | Test for structure and underframe結構和框架的測試 |
| 6.4.3 | Test for units with castors or wheels 帶輪子的柜子測試 |
| 8.1.3 | Sustained load test 長期承重測試 |
| 8.1.4 | Dislodgement test 抗分離測試 |
| Sample required: 3 sets of completed products with assembly instruction (if applicable). | |
| 樣品要求: 全套樣品3 套并包括安裝說明書(如適用). | |
| Turnaround time: Regular (12-17 working days), Express (9-12 working days). | |
| 所需時間: 標準(12-17 個工作天), 加快(9-12 個工作天). | |


