◆★◆【北京冠測精電儀器設備有限公司】產品系列--------熔體流動速率儀◆★◆   
熔體質量流動速率儀，塑料熔體流動速率的測定，什么是熔融指數，熔融指數分析儀，熔體流動速率儀價格，熔體流動速率儀廠家，熔體流動速率檢測儀，
------------------------------------------------------------------------

冠測公司以精美的產品、精湛的技術、精良的品質、精心的服務贏得了廣大用戶的一致認可。
Crown measurement company with exquisite products, superb technology, excellent quality, meticulous service to win the majority of users of the unanimous endorsement.
冠測公司保證所供產品均為經過標準化生產，嚴格測試并檢驗合格后才出廠的，性能卓越。
Crown testing company to ensure that the products are for the standardization of production, strict testing and testing after passing the factory, excellent performance.
◆★◆★◆**塑料檢測儀器名稱**◆★◆★◆
I * * * * * * * * * * plastic testing instrument - * - name
1 電子拉力試驗機 WDS-100KN 拉、壓、彎
1 electronic tensile testing machine WDS-100KN pull, pressure, bending
2 簡支梁沖擊試驗機 CBC-J 沖擊強度
2 simply supported beam impact testing machine CBC-J impact strength
3 懸臂梁沖擊試驗機 CBC-X 沖擊強度
3 cantilever beam impact testing machine CBC-X impact strength
4 落錘沖擊試驗機 CLC-300 沖擊強度
4 drop hammer impact test machine CLC-300 impact strength
5 熱變形維卡軟化點溫度測定儀 RBWK-300 熱變維卡
5 thermal deformation VEKA softening point temperature measuring instrument RBWK-300 heat become VEKA
6 熔體流動速率測定儀 RTSL-400B 流動速率
6 melt flow rate meter RTSL-400B flow rate
7 管材耐壓爆破試驗機 GCBP-（1-100路） 耐壓
7 tube bursting test machine GCBP- (1-100 Road) pressure
8 塑料球壓痕硬度測定儀 SLQY-96B 球壓痕硬度
8 plastic ball indentation hardness tester SLQY-96B ball indentation hardness
9 全自動聚乙烯壓痕硬度測定儀 SLYQ-96AI/3 壓痕硬度
9 full automatic polyethylene indentation hardness tester SLYQ-96AI/3 indentation hardness
10 塑料滑動摩擦磨損試驗機 M-200 摩擦系數、磨損量
10 plastic sliding friction and wear testing machine M-200 friction coefficient, wear volume
11 塑料耐環境應力開裂試驗機 NHY-A 耐環境應力
11 plastic resistance to environmental stress cracking test machine NHY-A resistance to environmental stress
12 塑料低溫脆性溫度沖擊測定儀 CJD-III 脆化沖擊
12 plastic low temperature brittleness temperature impact tester CJD-III embrittlement impact
13 馬丁耐熱試驗儀 MDR-300A 馬丁耐熱
13 Martin heat resistance tester MDR-300A Martin heat resistance
14 硬質套管彎曲試驗機 GCWQ-I 彎曲
14 rigid casing bending test machine GCWQ-I bending test machine
15 氧指數測定儀 YZS-75A 氧指數
YZS-75A oxygen index of 15 oxygen index measuring instrument
16 熾熱燃燒試驗儀 CRB-A 熾熱棒燃燒
16 the burning of the burning test instrument CRB-A
17 水平垂直綜合燃燒試驗儀 SCRS-A 水平和垂直燃燒
SCRS-A horizontal and vertical combustion of 17 horizontal and vertical integrated combustion tester
18 介電強度試驗儀 DDJ-100KV 介電強度
18 dielectric strength tester DDJ-100KV dielectric strength
19 高低頻介電常數測定儀 GCSTD-D 介電常數和介損
Dielectric constant and dielectric loss of 19 high and low frequency dielectric constant measuring instrument GCSTD-D
20 體積表面電阻率測定儀 GEST-121 體積和表面電阻率
20 volume surface resistivity measuring instrument GEST-121 volume and surface resistivity
21 導體和半導體橡膠塑料電阻率測定儀 GEST-125 電阻率
21 conductor and semiconductor rubber plastic electrical resistivity measuring instrument GEST-125 resistivity
22 全自動導熱系數測試儀-防護熱板法 DRXF-I 導熱系數
22 full automatic thermal conductivity tester DRXF-I thermal conductivity coefficient
23 塑料熱膨脹系數測定儀 GCPZY-100 熱膨脹系數
23 plastics coefficient of thermal expansion coefficient of GCPZY-100 thermal expansion coefficient
24 橡膠可塑性試驗機 KSX-100 可塑性
24 rubber plasticity testing machine KSX-100 plasticity
25 數顯橡膠疲勞龜裂試驗機 PLGL-300 疲勞龜裂
25 digital rubber fatigue cracking test machine PLGL-300 fatigue cracking
26 橡膠沖擊回彈性測試試驗機 CTX-15 沖擊回彈
26 impact resilience test machine CTX-15 impact rebound
27 杜邦沖擊試驗機 CDB-1000 沖擊性能
27 DuPont impact test machine CDB-1000 impact performance
28 橡膠密度計 XJMD-I 密度
28 rubber density meter XJMD-I density
29 橡膠測厚儀 XJCH-I 厚度
29 rubber thickness gauge XJCH-I thickness
30 橡塑邵爾A硬度計 LX-A 硬度
LX-A rubber hardness 30 shore A hardness tester
31 雙輪磨片機 MPJ-II 磨片
31 wheel disc grinding machine MPJ-II
32 DIN磨耗機(橡膠輥筒磨耗機) MHJ-I 磨耗
32 DIN wear machine (rubber roller wear MHJ-I abrasion machine)
33 橡膠阿克隆磨耗測試儀 MHJ-II 磨耗
33 rubber Akron MHJ-II wear tester
34 萬能制樣機 WZY-240 制樣
34 universal prototype WZY-240 sample preparation
35 啞鈴型制樣機 YLZ-A 制樣
35 dumbbell prototype YLZ-A sample preparation
36 缺口制樣機 ZQK-A 制樣
36 gap system prototype ZQK-A sample
37 沖片機 CPJ-25 制樣
37 punching machine CPJ-25 sample preparation
◆★◆★◆**滿足標準**◆★◆★◆
I * * * * * * * * * * * * meet the standard of the
GB/T 3682-2000 熱塑性塑料熔體質量流動速率和熔體體積流動速率的測定
Determination of mass flow rate and melt volume flow rate of 3682-2000 GB/T thermoplastic melt
《JB/T5456-2005熔體流動速率儀技術條件》
"JB/T5456-2005 melt flow rate meter technical conditions"
ISO 1133-2011 塑料--熱塑性塑料熔體質量流動速率(MFR)和熔體體積流動速率(MVR)的測定
1133-2011 ISO plastics - Determination of the melt mass flow rate (MFR) and the melt volume flow rate (MVR) of thermoplastic plastics
GB/T 1699-2003 硬質橡膠 馬丁耐熱溫度的測定
Determination of Martin heat resistant temperature of 1699-2003 GB/T hard rubber
GB/T 1035-70 塑料耐熱性（馬丁）試驗方法
Test method for heat resistance of 1035-70 GB/T plastics (Martin)
HG/T 3847-2008 硬質橡膠 馬丁耐熱溫度的測定
Determination of Martin heat resistant temperature of 3847-2008 HG/T hard rubber
GB/T1633《熱塑性塑料軟化溫度(VST)的測定》
GB/T1633 "determination of the softening temperature (VST) of thermoplastic plastics"
GB/T1634《塑料彎曲負載熱變形溫度試驗方法》
Test method for thermal deformation temperature of plastic bending load GB/T1634
GB8802《硬聚氯乙烯(PVC-U) 管材及管件維卡軟化溫度測定方法》
GB8802 "hard polyvinyl chloride (PVC-U) pipe and pipe fittings VEKA softening temperature measurement method"
ISO75 、ISO306 、ISO2507 等標準要求。
ISO75, ISO306, ISO2507 and other standard requirements.
ASTM1525 ASTM D648標準
ASTM D648 ASTM1525 standard
GB-T 23257-2009 埋地鋼質管道聚乙烯防腐層
23257-2009 GB-T buried steel pipeline polyethylene anticorrosive coating
SY/T0413-2002《埋地鋼質管道聚乙烯防腐技術標準》-壓痕硬度測定方法
SY/T0413-2002 "buried steel pipeline polyethylene anticorrosion technology standard" - Indentation Hardness testing method
GB3398-2008 塑料球壓痕硬度試驗方法
GB3398-2008 plastic ball indentation hardness test method
ISO 2039 塑料.硬度測定.第1部分:壓球法
ISO 2039 plastics - Determination of hardness - part first: press ball method
GB/T 2951-2008《電纜和光纜絕緣和護套材料通用試驗方法 第41部分:聚乙烯和聚丙烯混合料專用 試驗方法 耐環境應力開裂試驗
2951-2008 GB/T - General test methods for cable and cable insulation and sheath materials - Part forty-first: special test methods for polyethylene and polypropylene mixtures - resistance to environmental stress cracking tests
GB/T 1842-2008 塑料 聚乙烯環境應力開裂試驗方法
Test method for environmental stress cracking of 1842-2008 GB/T plastic polyethylene
GBT 5470-2008 塑料 沖擊法脆化溫度的測定
Determination of brittleness temperature of 5470-2008 GBT plastic impact method
GB/T 3960-1983 塑料滑動摩擦磨損試驗方法
Test method for sliding friction and wear of 3960-1983 GB/T plastics
GB/T 9141.8-1999 柔性石墨板材滑動摩擦系數測試方法
Test method for sliding friction coefficient of 9141.8-1999 GB/T flexible graphite sheet

------------------------------------------------------------------------
◆★◆【易促寶】---品牌策劃、全網營銷! ◆★◆
http://chifeng.qd8.com.cn/jiameng/xinxi2_18479626.html
http://www.sooshong.com/tianduow343/offerdetail-42992002.html
http://weiuow78.skxox.com/p/20160301/132905.html
------------------------------------------------------------------------
上海熔融指數儀，熔體流動速率儀價格 十堰，熔體流動速率測試，熔融指數試驗機 河池羅城，進口熔融指數儀，聚合物熔體流動速率的測定 泰安泰山區，塑膠熔融指數測定機，熔體流動速率儀器 懷遠縣，熔融指數測定，xnr-400b熔體流動速率儀 清流縣，